The Power of Single-Phase Immersion Cooling and Silicone in Achieving Enhanced 5G Data Center Performance and Sustainability Advances

Better for the Environment and Bottom Line By: Cathy Chu, Global Strategic Marketing Director, Consumer & Electronics, Dow

By Cathy Chu, Global Strategic Marketing Director, Consumer & Electronics, Dow

The promise of 5G networking for connecting our world includes higher multi-gigabit-per-second (Gbps) peak data transfer speeds, ultra-low latency, higher reliability, massive network capacity, increased availability and a more uniform user experience. However, achieving this performance places heavy demands on physical and digital infrastructure and endpoint devices, including higher operating temperatures, increased electromagnetic interference (EMI), and a bigger impact on the environment. Consider:

  • Sponsored
    style="font-weight: 400;" aria-level="1">The growth of data centers since 2010 has resulted in a 30% increase in their collective energy requirements.
  • 40% of the energy needed by data centers is for essential cooling systems.
  • 1.5% of the world’s electricity consumption is currently accounted for by data centers.
  • One billion liters of water are needed by data centers every day in the United States alone.

By implementing more efficient and sustainable cooling technology solutions, data center operators can lessen energy, water, and land consumption, leading to significant cost savings.  Immersion cooling is a technique in which electrical and electronic components, including complete servers and storage devices, are fully submerged in a thermally conductive but electrically insulating liquid coolant. This novel approach to cooling reduces a data center’s energy use by over 60% – which is better for the environment and the bottom line. Furthermore, water consumption in immersion cooling amounts to less than one percent of the total water used in traditional cooling methods. 


When it comes to immersion cooling, there are two options available to cloud and data center operators: single-phase and two-phase. The key difference between single-phase and two-phase immersion cooling is that the former stays in its liquid phase while the latter transforms from a liquid into a gaseous state. In single-phase immersion cooling, heat is transferred to the coolant through direct contact with server components. The coolant then returns to the server from a heat exchanger at a user-specified temperature. Unlike two-phase immersion cooling, the coolant does not boil off and is cooled via a heat exchanger. In two-phase immersion cooling, the fluid boils from the server heat, transforming from a liquid into a vapor that passively condenses back to a liquid form when it directly contacts a water-cooled condenser. 

Single-phase immersion cooling offers data center operators several benefits over traditional two-phase immersion cooling systems, including reduced operating expenses and environmental health and safety (EHS) risk, as well as improved hardware stability. While two-phase immersion cooling is an option for data and cloud centers, there have been recent concerns raised by the Environmental Protection Agency (EPA) over two-phase coolants because they typically depend on Poly-Fluorinated Alkyl Substances (PFAS) that are considered hazardous. Single-phase immersion cooling, on the other hand, can be conducted with fluids that are safer for the environment, making it an ideal solution for data center operators looking to utilize more sustainable practices. 


To date, the three primary liquids used for immersion cooling are fluoro-carbon fluids, synthetic oil, and silicone fluids. While all of these provide significant improvements over air-cooled systems, each has certain performance challenges:

  • Fluoro-carbon fluids are relatively costly and present significant environmental, health and safety (EHS) concerns, especially in the event of accidental leakage.
  • Synthetic oils have concerns of flammability and thermal instability compared to other alternatives.
  • Silicone fluids provide significant cost advantages but are incompatible with other silicone components.

However, the solution to these challenges may lie in hybrid silicone-organic fluid. Designed for single-phase immersion cooling, this type of technology can deliver outstanding thermal conductivity for efficient and cost-effective heat dissipation and a remarkably low Global Warming Potential (GWP) score. Hybrid silicone-organic liquid can get into small spaces closer to the materials that need cooling, and there is no need for chillers, computer room air conditioning (CRAC)s, computer room air handlers (CRAH)s, or raised floors. It can also support the growth of server load densities and increased computer performance while substantially reducing data center footprint requirements and power usage. Lastly, it removes the challenge of compatibility with other silicone components for data center cooling operations. 


As high-speed, high-volume, hyperscale 5G data centers become increasingly important for connecting the world, Synergy Research7 estimates that the global installed base of operational data centers will pass the 1,000 mark by 2024 and continue growing rapidly. Precedence Research8 estimates that the global hyperscale data center market size will increase from just under $80 billion in 2022 to $593 billion by 2030. Single-phase immersion cooling systems can support this data center expansion, as well as performance and sustainability requirements, in key industries of the future, including: 

  • 5G edge computing centers: Often located in urban areas where space is more expensive and less available, edge computing centers can benefit greatly from single-phase immersion cooling, enabling more cooling efficiency in compact spaces. 
  • High-frequency trading: These transactions require high-performing systems that rely on timeliness and response speed. Single-phase immersion cooling can achieve higher overclocking possibilities for these scenarios. 
  • Blockchain and cryptocurrency: Blockchain technology generates substantial heat due to the many machines connected to a network with frequent mathematical calculations that single-phase immersion cooling can handle.
  • AI and machine learning: A large number of graphic processing units (GPU) are necessary for training algorithms for AI applications, creating a high level of heat and requiring a lot of electricity to cool. In these cases, single-phase immersion cooling emerges as a cost-efficient method.

For companies to operate more efficiently and positively impact the environment, they need to carefully consider the technologies and methods of cooling they deploy in their data centers. With a wide range of benefits to both performance and the planet, single-phase immersion cooling, especially when backed by hybrid silicone-organic fluids, should be on the table for those companies serious about the future. 


  1. Castrol Building Data Center Immersion Cooling Test Site (Environment + Energy Leader)
  2. Castrol Building Data Center Immersion Cooling Test Site (Environment + Energy Leader)
  3. Castrol Building Data Center Immersion Cooling Test Site (Environment + Energy Leader)
  4. Data centre water consumption ( | NPJ Clean Water) 
  5. The Best Way to Reduce Water Waste: Immersion Cooling (TMGCore)
  7. Pipeline of Over 300 New Hyperscale Data Centers Drives Healthy Growth Forecasts | Synergy Research Group (
  8. Hyperscale Data Center Market Size, Trends, Growth, Report 2030 (



Headshot of Cathy ChuCathy Chu is the Global Strategic Marketing Director for the Consumer & Electronics segment at Dow. In her role, she is responsible for driving global market strategy and portfolio management covering consumer electronics, industrial electronics, microelectronics related adhesives & sealants, as well as thermal management and protection materials. Additionally, Cathy also oversees the strategic planning for the global release coating and specialty tape and film business at Dow. Born and raised in Shanghai, Cathy has worked and studied in Singapore, France, Australia, and the United States, developing a unique, global perspective of the electronics industry. 

Leave a Reply

Your email address will not be published. Required fields are marked *